If you own a Maytag Bravos XL washer and it won’t turn on, you’re not alone. This frustrating issue can have several possible causes, but fortunately, many of them can be resolved with some troubleshooting.
In this article, we’ll walk you through the steps you can take to identify and solve the problem, so you can get your washer back up and running.
Check the Power Source
Contents
- 1 Check the Power Source
- 2 Inspect the Control Panel
- 3 Check the Door Switch
- 4 Error codes
- 5 Inspect the Lid Switch
- 6 Check the Timer and Electronic Control Board
- 7 Final Troubleshooting Tips
- 8 FAQs
- 8.1 Why won't my Maytag Bravos XL washer turn on?
- 8.2 How do I fix an unbalanced load issue with my washer?
- 8.3 What should I do if my washer is leaking water?
- 8.4 What does an error code Sud or SD mean on my Maytag Bravos XL washer?
- 8.5 How do I clean the washer dispenser?
- 8.6 Why is my washer cycle taking too long?
- 8.7 What should I do if my washer is not draining water?
- 8.8 Can I use regular detergent in my Maytag Bravos XL washer?
- 9 Conclusion
The first thing to check is the power source. Make sure the washer is properly plugged in and receiving power. Check the circuit breaker and outlet. Sometimes, a simple reset of the circuit breaker can fix the issue.
| Possible Cause | Solution |
|---|---|
| Power source is not on | Make sure the washer is properly plugged in and receiving power. |
| Circuit breaker is tripped | Check the circuit breaker and reset it if necessary. |
| Outlet is not functioning | Test the outlet with another appliance to make sure it's functioning properly. |
| Power cord is damaged or worn | Check the power cord for any signs of damage or wear and tear. |
| Power outage | Wait for power to return or use a backup power source. |
| Power outage | Wait for power to return or use a backup power source. |
| Overloaded circuit | Unplug other appliances or devices on the same circuit or move the washer to another outlet. |
| Circuit breaker is tripped | Check the circuit breaker and reset it if necessary. |
| Electronic control board malfunction | Seek professional help to repair or replace the control board. |
| Motor overload | Unplug the washer and wait for a few minutes, then restart the cycle. |
Note: This table provides examples of possible issues, causes, and solutions related to the power source for a Maytag Bravos XL washer. It’s important to follow specific instructions and safety guidelines from the manufacturer and seek professional help if necessary.
Inspect the Control Panel
The control panel is another area to inspect. Look for any signs of damage or malfunction. Try resetting the control board. Unplug the washer, wait a few minutes, and then plug it back in.
| Row | Issue | Possible Cause | Solution |
|---|---|---|---|
| 1 | Washer won't turn on | Control panel is damaged or malfunctioning | Inspect the control panel for any signs of damage or malfunction. |
| 2 | Washer won't start or respond | Control board needs reset | Unplug the washer for a few minutes and then plug it back in. |
| 3 | Error codes on the control panel | Faulty control board | Check for error codes on the display and consult the user manual for troubleshooting advice. |
| 4 | Buttons on control panel not responding | Faulty touchpad or control board | Clean the touchpad and/or replace the control board if necessary. |
| 5 | Washer cycle not starting | Start button malfunctioning | Check the start button for any signs of damage or wear and tear, and replace if necessary. |
| 6 | Washer cycle not starting | Door not properly closed | Make sure the door is fully closed and securely latched. |
| 7 | Washer cycle not starting | Delay start option selected | Cancel the delay start option or adjust the time as needed. |
| 8 | Washer cycle interrupted | Power outage | Wait for power to return or use a backup power source. |
| 9 | Washer cycle interrupted | Overloaded circuit | Unplug other appliances or devices on the same circuit or move the washer to another outlet. |
| 10 | Washer cycle interrupted | Faulty control board or motor | Seek professional help to diagnose and repair the issue. |
Note: This table provides examples of possible issues, causes, and solutions related to the control panel for a Maytag Bravos XL washer. It’s important to follow specific instructions and safety guidelines from the manufacturer and seek professional help if necessary.
Check the Door Switch
The door switch is an important safety feature that can prevent the washer from turning on if the door is open. If the door switch is malfunctioning, it can also prevent the washer from turning on. To test the door switch, unplug the washer, remove the door switch assembly, and test it with a multimeter. If the door switch is faulty, replace it.
| Row | Issue | Possible Cause | Solution |
|---|---|---|---|
| 1 | Washer won't start or respond | Door switch is malfunctioning | Check the door switch for any signs of damage or wear and tear. |
| 2 | Washer won't start or respond | Door not properly closed | Make sure the door is fully closed and securely latched. |
| 3 | Washer stops mid-cycle | Door not properly closed | Make sure the door is fully closed and securely latched. |
| 4 | Washer stops mid-cycle | Door switch is malfunctioning | Test the door switch with a multimeter and replace it if necessary. |
| 5 | Washer won't start or respond | Door switch assembly is faulty | Replace the door switch assembly. |
| 6 | Washer stops mid-cycle | Door switch assembly is faulty | Replace the door switch assembly. |
| 7 | Washer starts and stops quickly | Door switch is malfunctioning | Test the door switch with a multimeter and replace it if necessary. |
| 8 | Washer starts and stops quickly | Door not properly closed | Make sure the door is fully closed and securely latched. |
| 9 | Washer won't start or respond | Door switch connector is loose | Check the door switch connector and secure it if necessary. |
| 10 | Washer stops mid-cycle | Door switch connector is loose | Check the door switch connector and secure it if necessary. |
Note: This table provides examples of possible issues, causes, and solutions related to the door switch for a Maytag Bravos XL washer. It’s important to follow specific instructions and safety guidelines from the manufacturer and seek professional help if necessary.
Error codes
This table provides examples of possible error codes, causes, and solutions for a Maytag Bravos XL washer. It’s important to follow specific instructions and safety guidelines from the manufacturer and seek professional help if necessary.
| Row | Error Code | Possible Cause | Solution |
|---|---|---|---|
| 1 | F1 or E1 | Water level sensor malfunction | Check the sensor for any signs of damage or malfunction and replace if necessary. |
| 2 | F2 or E2 | User interface mismatch | Check for any mismatch between the user interface and control board. |
| 3 | F3 or E3 | Temperature sensor malfunction | Check the temperature sensor for any signs of damage or malfunction. |
| 4 | F4 or E4 | Drain pump malfunction | Check the drain pump for any signs of damage or malfunction and replace if necessary. |
| 5 | F5 or E5 | Lid lock malfunction | Check the lid lock for any signs of damage or malfunction and replace if necessary. |
| 6 | F6 or E6 | Drive motor malfunction | Check the drive motor for any signs of damage or malfunction and replace if necessary. |
| 7 | F7 or E7 | Motor speed sensing circuit malfunction | Check the motor speed sensing circuit for any signs of damage or malfunction. |
| 8 | F8 or E8 | Dispenser motor malfunction | Check the dispenser motor for any signs of damage or malfunction and replace if necessary. |
| 9 | F9 or E9 | Water inlet valve malfunction | Check the water inlet valve for any signs of damage or malfunction and replace if necessary. |
| 10 | Sud or SD | Excessive suds or blocked drain | Reduce the amount of detergent used and make sure the drain is not blocked. |
| 11 | UL or unbalanced load | Unbalanced load | Adjust the load and redistribute the items to balance the load. |
| 12 | LF or long fill | Water supply issue | Check the water supply hoses and valves for any signs of damage or malfunction. |
| 13 | Ld or slow drain | Drain issue | Check the drain hose and pump for any signs of blockage or malfunction. |
| 14 | Sr or stuck relay | Control board issue | Check the control board for any signs of damage or malfunction and replace if necessary. |
| 15 | HC or hot/cold supply | Water supply issue | Check the water supply hoses and valves for any signs of damage or malfunction. |
| 16 | DC or dispenser issue | Dispenser issue | Clean the dispenser drawer and check for any blockages or damage. |
| 17 | DL or door issue | Door issue | Make sure the door is properly closed and latched, and check the door switch for any signs of damage or malfunction. |
| 18 | DO or door open | Door issue | Make sure the door is properly closed and latched, and check the door switch for any signs of damage or malfunction. |
| 19 | Du or detergent issue | Detergent issue | Use HE detergent and make sure it's properly measured and added to the dispenser. |
| 20 | Sd or suds detected | Excessive suds | Reduce the amount of detergent used and run a rinse cycle. |
| 21 | Nd or no drain | Drain issue | Check the drain hose and pump for any signs of blockage or malfunction. |
| 22 | OE or overflow error | Water overflow issue | Check the water level sensor and make sure the washer is properly leveled. |
| 23 | CE or communication error | Control board issue | Check the control board for any signs of damage or malfunction and replace if necessary. |
| 24 | PF or power failure | Power outage or surge | Reset the washer and make sure the power source is stable and properly grounded. |
| 25 | Hr or heater issue | Heater issue | Check the heating element and thermostat for any signs of damage or malfunction. |
Inspect the Lid Switch
The lid switch is another safety feature that can prevent the washer from turning on if the lid is open. Like the door switch, a faulty lid switch can also prevent the washer from turning on. To test the lid switch, unplug the washer, remove the lid switch assembly, and test it with a multimeter. If the lid switch is faulty, replace it.
Check the Timer and Electronic Control Board
If the power source, control panel, door switch, and lid switch are all functioning properly, the issue may lie with the timer or electronic control board. These components can be more complex to diagnose and repair, so it’s important to seek professional help.
Final Troubleshooting Tips
If none of the above steps resolve the issue, try the following additional troubleshooting tips:
- Check the power cord for any signs of damage or wear and tear.
- Test the outlet with another appliance to make sure it’s functioning properly.
- Make sure the washer is properly leveled and balanced.
- Try resetting the main control board by unplugging the washer for a few minutes.
- If all else fails, contact a Maytag repair professional for assistance.
| Row | Issue | Possible Cause | Solution |
|---|---|---|---|
| 1 | Washer won't turn on | Power source issue | Check the power source and make sure the washer is properly plugged in. |
| 2 | Washer won't start or respond | Control panel issue | Inspect the control panel and make sure it's not damaged or malfunctioning. |
| 3 | Washer stops mid-cycle | Unbalanced load | Adjust the load and redistribute the items to balance the load. |
| 4 | Washer stops mid-cycle | Drain or water supply issue | Check the drain hose, pump, and water supply hoses and valves for any issues. |
| 5 | Washer cycle takes too long | Load size issue | Make sure the load size is appropriate for the cycle and use the correct settings. |
| 6 | Washer cycle takes too long | Water supply issue | Check the water supply hoses and valves for any signs of blockage or malfunction. |
| 7 | Washer making loud noises | Unbalanced load or wear and tear | Adjust the load and redistribute the items, and inspect the parts for any damage. |
| 8 | Washer making loud noises | Loose parts or foreign objects | Inspect the washer drum and parts for any loose items or foreign objects. |
| 9 | Washer not draining water | Drain issue | Check the drain hose and pump for any signs of blockage or malfunction. |
| 10 | Washer not draining water | Clogged filter or drain | Clean the filter or drain and remove any blockages or debris. |
| 11 | Washer leaking water | Hose or connection issue | Inspect the hoses and connections for any signs of damage or wear and tear. |
| 12 | Washer leaking water | Door seal or gasket issue | Inspect the door seal or gasket for any signs of damage or wear and tear. |
| 13 | Washer not spinning | Unbalanced load or wear and tear | Adjust the load and redistribute the items, and inspect the parts for any damage. |
| 14 | Washer not spinning | Drive belt issue | Inspect the drive belt for any signs of wear and tear or damage, and replace if necessary. |
| 15 | Washer not agitating | Agitator issue | Inspect the agitator for any signs of damage or wear and tear, and replace if necessary. |
| 16 | Washer not agitating | Drive motor issue | Inspect the drive motor for any signs of damage or malfunction, and replace if necessary. |
| 17 | Washer making grinding noise | Bearing issue | Inspect the bearings for any signs of wear and tear or damage, and replace if necessary. |
| 18 | Washer not heating | Heating element issue | Inspect the heating element for any signs of damage or malfunction, and replace if necessary. |
| 19 | Washer not heating | Thermostat issue | Inspect the thermostat for any signs of damage or malfunction, and replace if necessary. |
| 20 | Washer shaking or vibrating | Unbalanced load or wear and tear | Adjust the load and redistribute the items, and inspect the parts for any damage. |
| 21 | Washer shaking or vibrating | Leveling issue | Check the washer leveling and adjust if necessary. |
FAQs
Why won't my Maytag Bravos XL washer turn on?
The washer may not turn on due to power source issues or control panel malfunctioning. Check the power source and inspect the control panel for any signs of damage or malfunction.
How do I fix an unbalanced load issue with my washer?
Adjust the load and redistribute the items to balance the load. Avoid overloading the washer and use the correct settings for the load size.
What should I do if my washer is leaking water?
Inspect the hoses and connections for any signs of damage or wear and tear. Check the door seal or gasket for any signs of damage or wear and tear.
What does an error code Sud or SD mean on my Maytag Bravos XL washer?
The error code Sud or SD indicates that there are excessive suds or a blocked drain. Reduce the amount of detergent used and make sure the drain is not blocked.
How do I clean the washer dispenser?
Remove the dispenser drawer and clean it with warm water and a mild detergent. Check for any blockages or damage to the dispenser.
Why is my washer cycle taking too long?
A cycle may take longer due to a load size issue, water supply issue, or malfunctioning parts. Make sure the load size is appropriate for the cycle and check the water supply hoses and valves for any issues.
What should I do if my washer is not draining water?
Check the drain hose and pump for any signs of blockage or malfunction. Clean the filter or drain and remove any blockages or debris.
Can I use regular detergent in my Maytag Bravos XL washer?
It's recommended to use high-efficiency (HE) detergent in a Maytag Bravos XL washer. Using regular detergent may cause excess suds and affect the washer's performance.
Conclusion
A Maytag Bravos XL washer that won’t turn on can be frustrating, but it doesn’t have to be a major problem. By following these troubleshooting tips, you can identify and resolve many of the possible causes of the issue. Whether it’s a faulty door switch, a malfunctioning control panel, or a more complex problem, there are solutions available. So don’t give up on your washer just yet – try these steps and get it back up and running!
- Effective Guide to GE Deep Fill Washer Troubleshooting - October 16, 2023
- Uncover the Speed: How Fast Does a Washing Machine Spin? - October 15, 2023
- The Maytag Bravos XL Dryer Not Heating: Troubleshooting Guide - October 15, 2023
